UFS Explorer RAID Recovery for macOS: Rebuild a Failed RAID or NAS on Your Mac
UFS Explorer RAID Recovery for macOS is a $144.67 Mac app (perpetual Personal license) that reassembles failed RAID arrays, NAS volumes and Fusion Drives from the bare drives and recovers the files on them, with no NAS box or RAID controller needed. It's for Mac users facing a dead Synology, QNAP, Drobo or Apple Software RAID who'd rather try a do-it-yourself recovery before paying a lab.
The NAS that held every photo and project says "volume crashed", or simply won't boot. If the drives themselves can still be read, this tool can usually put the array back together on your Mac, show you the folders, and let you copy everything to a new disk.
Quick facts
- Version: 10.22, released September 10, 2026
- Developer: SysDev Laboratories (UFS Explorer)
- Runs on: macOS 11 and later, with a separate build for macOS 10.9 to 10.15. Windows and Linux versions need their own license.
- RAID levels: 0, 1, 1E, 3, 5, 6, 7 and nested 10, 50, 60, plus Synology SHR, Drobo BeyondRAID, Btrfs-RAID, ZFS RAID-Z, Apple Software RAID and Fusion Drive
- License: Personal, perpetual, one Mac, with a year of free updates. Not for commercial use.
- Free trial: no time limit. RAID assembly, scanning and preview all work, but it only saves files up to 768 KB.
What we checked: the price on the order page ($144.67 for the macOS Personal License with 1 year of updates) and the 22.8 MB macOS download (ufsxrci.zip) on SysDev's server, both on October 29, 2026. We didn't assemble or recover a failed array ourselves.
Before you buy: prove it with the trial
- Refunds are strict. SysDev refunds only when you tested the trial first and the paid version then fails from a software error it can't fix within 7 days. A wrong edition gets a license swap, not a refund.
- Don't let the NAS rebuild. Power it off, label each drive with its bay number, and never initialize or "repair" the array in the NAS first.
- Image weak drives. If a drive clicks, slows down or shows SMART errors, make a disk image first and work from that.
- Mac license only. This license won't activate the Windows or Linux builds.
Download Free TrialBuy Now
Overview
RAID Recovery is SysDev's step up from UFS Explorer Standard Recovery. It does everything Standard does for single drives (undelete, formatted and RAW recovery, APFS and BitLocker decryption, virtual disks) and adds a full RAID layer: automatic array detection, a manual RAID Builder and adaptive reconstruction for drives with bad sectors.
The Mac build uses the same window and tools as the Windows and Linux builds. You connect the member drives to the Mac (USB-SATA adapters or a multi-bay dock), open them, and the program lists each drive and partition. When it recognizes RAID metadata, the assembled volume appears as one more storage you can Explore or scan. Everything happens on a virtual copy: nothing is written to the original drives.
From SysDev's Fusion Drive article: an SSD image and an HDD image, each with an APFS span component, assembled into one 1.21 TB "APFS Fusion" storage with its APFS partition. The screenshot was taken on a Windows host. The Mac build shows the same interface.
Features
Automatic assembly of NAS and RAID volumes
UFS Explorer RAID Recovery reads the RAID metadata that NAS boxes and controllers store on each member drive and rebuilds the volume by itself. It recognizes Synology (including SHR), QNAP, Drobo, Buffalo and dozens of other NAS layouts, Linux mdadm and LVM, Btrfs-RAID, ZFS RAID-Z, Windows Storage Spaces and Dynamic Disks, and hardware controller formats such as DDF (LSI, Dell, Intel), JMicron and 3ware. Drobo's BeyondRAID gets its own assistant tool.
Apple Software RAID and Fusion Drives
UFS Explorer RAID Recovery for macOS handles Apple's own multi-disk setups: Apple Software RAID sets made in Disk Utility and APFS Fusion Drives whose SSD and hard drive have come apart, for example after one was replaced. It reassembles the pair and reads the APFS volume, including encrypted APFS when you have the password.
RAID Builder when the metadata is gone
UFS Explorer's RAID Builder lets you assemble an array by hand when it was reinitialized or its metadata is damaged: pick the RAID level, put the drives in order, set the stripe size and offset, and add a placeholder for a missing drive. The result shows up instantly, so you can check the folders before running a full scan, and configurations can be saved.
The RAID menu with Build RAID and the Drobo BeyondRAID assistant, and the builder panel with two member disks (SSD.vmdk and HDD.vmdk) and the virtual RAID settings on the right.
Adaptive reconstruction for drives with bad sectors
UFS Explorer RAID Recovery's disk imager reads a failing drive in several passes and records a bad-sector map. When the array is assembled from the images, it uses parity (RAID 5, 6 and nested levels) or mirror copies to rebuild the unreadable blocks instead of leaving holes in your files. Version 10.22 improved the Mac imager's tracking of a USB drive that disconnects and reconnects mid-image.
Full file recovery on the rebuilt volume
Once the array is up, UFS Explorer RAID Recovery reads APFS, HFS+, NTFS, ReFS, Ext2/3/4, XFS, Btrfs, ZFS, FAT and exFAT, finds deleted files, scans damaged file systems, and uses IntelliRAW signature search for files whose folder records are gone. Long scans can be paused, resumed and saved.
Benefits
- A fraction of a lab's price. Customer stories on SysDev's site mention lab quotes from $1,300 to around $6,000 for failed NAS units.
- Safe to experiment. The original drives are only read, so you can try different RAID parameters as often as you like.
- No Windows PC needed. Mac owners can do the whole recovery on the Mac they already have.
Real-World Uses
- A Synology that says "volume crashed": connect the drives to the Mac through a dock, let the SHR volume assemble, and copy the shared folders to a new external drive.
- An iMac Fusion Drive after a drive swap: image the SSD and the hard drive and reassemble the Fusion pair to get the user folder back.
- A Disk Utility RAID 0 that disappeared: rebuild the striped set from its two drives.
- A RAID 5 with one dead and one weak drive: image the weak drive, then let parity fill in its bad blocks.
Who It's For, and Who Should Skip It
UFS Explorer RAID Recovery for macOS fits technically comfortable Mac users, small studios and IT people who can pull drives, connect several at once and read terms like stripe size and parity.
Skip it if your data sits on a single Mac drive: UFS Explorer Standard Recovery costs less and covers that. Skip it if a drive is physically dead (no spin, burnt board, heads clicking): that's a lab job, since software can't read what the drive won't return. Professional recovery services and companies need SysDev's Commercial or Corporate licenses, and if you'd rather run the recovery on a PC, buy the Windows edition instead.
Usage Guide
- Prepare: power off the NAS or server, label each drive with its bay number, and remove the drives.
- Install: download the macOS trial, open the installer, and copy UFS Explorer RAID Recovery to Applications on a drive that isn't part of the array.
- Allow disk access: run the app with administrator rights. On some Macs, macOS security settings block raw access to internal drives, and SysDev's knowledge base explains how to unblock them.
- Connect and image: attach the member drives and image any that show errors.
- Assemble: in most cases the array appears automatically. If not, use RAID > Build RAID and enter the parameters.
- Explore, scan, save: check the folders, scan if needed, enter your license code, and save the files to a separate drive, never back to the array.
From SysDev's Mac setup instructions: macOS asks whether to open the "Install UFS Explorer RAID Recovery" app downloaded from sysdevlabs.com. The screenshot is from an older macOS and installer.
Where it falls short
- Unknown parameters need know-how. When auto-detection fails, you have to work out drive order, stripe size and parity yourself. Recovery technicians warn that a badly damaged array isn't a plug-in-and-go job.
- Connecting many drives to a Mac. Most Macs have few ports, so a four- or eight-drive NAS means a multi-bay dock or several adapters.
- A technician's interface. It's dense and not Mac-like, and long scans on big arrays take hours.
- Raw results lose names. Files found only by signature come back with generated names and no folders.
What Users Say
Independent reviews of the RAID edition are scarce, and many write-ups come from competing recovery vendors, so they aren't quoted. What's left is SysDev's customer stories and professional technicians' forum discussions. The stories cover UFS Explorer generally, across platforms.
Customer stories on SysDev's testimonials page
Alfonso Batalla, Artist: "Around 1tb of photographs were lost when OS-X Raid 0 dissapeared from my system." Local professionals "were only able to recover file names but no files at all", but with UFS Explorer "It found all my files."
Romano CIBIEN: "I lost a RAID5 array on my Buffalo NAS. Just a couple of minutes ago, I bought UFS Explorer, followed the online manual step-by-step and within 5 minutes I got my data back."
Scott Pynn: "I tried software from several other vendors, but only yours was able to correctly rebuild the re-initialized RAID-5 array and the ext3 filesystem, and then recover the lost files."
Ran: "Your product worked very well, took a *long* time, but in the end it was worth it!"
Recovery professionals on the HDD Guru forums (older versions)
northwind, on a home user told to "just run" UFS Explorer on a Buffalo RAID 5: "It isn't as simple as "plug the disks into a machine and run ufs and there you go"." When auto-detection fails, "someone with knowledge must identify disk order, parity, block size etc."
data-medics: "UFSExploder is good for some of the odd filesystem's like HFS, but is annoying and crashes all the time." Others in the same thread recommended UFS Explorer and said they run several tools on a case "to see which one provides the best result."
The pattern: customers praise it for rebuilding arrays other tools can't see, including Mac RAID 0 sets and Linux-based NAS volumes. Professionals note the learning curve, long scans and crashes in older versions. The trial tells you which side your case is on before you pay.
Comparisons
RAID Recovery vs Standard Recovery for macOS
Standard Recovery covers single drives: deleted, formatted and corrupted volumes, APFS and HFS+. RAID Recovery adds the RAID layer (auto-assembly, RAID Builder, NAS layouts, Fusion Drive and Apple Software RAID) and the adaptive reconstruction for bad sectors. If only one drive is involved, Standard is enough.
RAID Recovery vs Network RAID and Professional
UFS Explorer Network RAID assembles arrays from drives spread across several networked computers, and Professional Recovery adds forensic and lab tools. Both are aimed at professionals and cost more.
FAQs
Can UFS Explorer RAID Recovery for macOS recover a Synology SHR volume?
Yes. UFS Explorer RAID Recovery recognizes Synology Hybrid RAID and assembles it from the member drives. Connect all the drives, or images of them, to the Mac.
Does UFS Explorer RAID Recovery run on older Macs?
Yes. The current build needs macOS 11 or later, and SysDev offers a separate build for macOS 10.9 to 10.15.
What happens after the year of updates ends?
UFS Explorer RAID Recovery's license is perpetual, so the version you have keeps working. Updates released after the first year need a license upgrade from SysDev.
How much RAM does UFS Explorer RAID Recovery need?
UFS Explorer RAID Recovery runs with as little as 32 MB of RAM, but SysDev recommends 8 GB and a 4-core, 64-bit system for RAID work.
Can I recover files if one drive of my RAID 5 is completely dead?
Yes, in most cases. RAID 5 tolerates one missing member, so UFS Explorer RAID Recovery can assemble the array from the remaining drives with a placeholder for the dead one.
Does UFS Explorer RAID Recovery write to my drives?
No. UFS Explorer RAID Recovery works read-only on the original drives and builds the array virtually. Save recovered files to a different drive.
System Requirements
- Operating system: macOS 11 or later (separate build for macOS 10.9 to 10.15)
- Minimum: 32 MB RAM, 30 MB free disk space
- Recommended for RAID work: 8 GB RAM, 4 logical cores, 64-bit system
- Hardware: a way to connect every member drive (dock, USB-SATA adapters), plus a separate drive for the recovered files
Conclusion
UFS Explorer RAID Recovery for macOS is worth about $145 if you're a Mac user with a failed NAS, RAID set or Fusion Drive whose drives still read: it assembles the array on your Mac without the original hardware and costs a small fraction of a lab quote. The main reasons not to buy it are a physically dead drive, which needs a lab, and an array so damaged that you'd have to work out its parameters by hand without the know-how. The free trial assembles and previews everything, so you'll know whether it works on your drives before you pay.
Download Free TrialBuy Now