Vbar NEO non v-link freeze with BK 8002 servos (new discovery)

New findings while powered by the R2 Prototyping buffer only and plugged into an Align tail servo and Hobbywing ESC/BEC, it works... add lipo power to the Hobbywing and no go...

---

Closed Caption:

okay Holly freakers this is darryl just
updating the BK 800 - servo issue with
the b-bar I would really love for
somebody else to test this
please take 180 to improve to me that it
does work with a non be linked to a bar
and an external satellite because i
haven't gotten mine to work on any of
mine
a separate proof that this is an issue
sure would help speaking to the people
over there be Bart mikado on the forums
I was told that a capacitor would smooth
out the power
the problem was power spikes and the
fact that the external satellite is
plugged into the external bus
i purchased a futaba capacitor also
purchase the racers edge capacitor it's
it's a glitch device
and i also purchased a are to
prototyping
I think this is the granddaddy of them
all here I don't see them coming up with
anything better than this and no this
isn't a fifty dollar range
this was in the let's say four or five
dollar range and this right here was
about six
taba trying both of these
I got no difference
trying the art to prototyping as well i
still have a problem doing only one
servo running off the hobbywing reason
I'm running off the hobbywing I do have
a lipo still getting the same result
between the two is something very
interesting happened and i wanted to
show see it lock up
stop you can hear it
ok so we see it stop its one servo just
can't see it being a power issue but me
what makes me really think this has
something to do with the frequencies
somehow of these devices interfering
with the actual antenna is that this is
something that I notice with the light
bulb plugged into only the neo and one
servo completely off of the helicopter
it was still do it but as it sits the
neo is plugged into this
lipo the hobbywing dec and one tail
servo for the line
it's a it's a line tail servo and though
this is something that i noticed i don't
know if it's going to do it again but
when i killed the lipo
naturally the r2 prototyping capacitors
keep going
I just showed you that it didn't work
with them to work fast i can go
my finger slips off
I haven't got 250 rotor down here to
expert here look
pitch . 50 and it works just curious
fine plug the lion tail servo messing up
any other combination
I've not got it to work and put that if
I using a line tail servo and then our
to prototyping capacitor pack for some
miracle this thing somehow works so
please help Elly freakers i hope the
stop he sees us
mikado I want them to give me their
opinion - thanks
this again this is we're a smoke