Vbar NEO non v-link freeze with BK 8002 servos

Issues with Vbar and BK 8002 servos, proven okay with BK 8001 servos...

---

Closed Caption:

ok Ellie freakers just got back from
Oklahoma 14 hour drive and i promised i
would make a video showing the issue
with the 800 tues have already installed
and setup BK 80 ones on the heli got my
pitch pump setting up to 50
you can see this 50
this is the same neo that was messing up
with the 80 shoes and down here
ok September tues have
hooked to my old icon
so it's all day long
try to give you a better view
so we have a big test there now let's
check out these steps whatsoever
no just set the camera down for this one
with me
changing
yeah
that's the power turned off to the you
won't change the server is over
ok
yeah
apologies for the delay i have the 80
tues look to the neo same do that work
fine with the 80 ones you see here that
we pulled off the 80 one's got the tools
and
increase same servers were fine with the
icons can even stay in 50 on the best
pump
now let's turn the value down i'll show
you how bad this is
okay fine you
I don't use pitch pump does that matter
right now we're 20 pitch pump works fine
normal right
what happens when you really wrap on it
happens all three services at the same
time the big picture is I can unplug and
only have one server and it will do the
same thing
well one serving of your fries finger
have another reason round up if you go
too slow it's okay it's okay look
freakers I've proven that using an
external power source which is a lie
Pope for the power on the amps there is
nothing wrong with the neo because new
had no problem operate NATO once which
are brand new
no problem with the 802 because it 02 is
work fine with the icon but the 802 just
one single 8021 you can work with the
need the v-bar so I don't know what is
going on
but here's my video to show you what
happened