Backing up Windows to NAS using AOMEI Backupper

Backing up Windows to NAS using AOMEI Backupper


Aside from backing up data locally, AOMEI Backupper also has the ability to back up your data to a network drive (aka NAS; network attached storage). Backing up to a network device not only offers easier access (either access from anywhere on the same WiFi or even the Internet if you so choose), but it is also safer than a local backup just by being physically distinct/separate from the local machine.
Closed Caption:

hey guys welcome back following my last
Community post on Al's giveaway today
we're going to be focusing on some
backups so let me open up all my backup
real quick and today we're going to talk
about how to back up your OS to a Nas to
a network attached storage device Come
on load
load okay as you can see I have my
backup right here I'm just going to
delete it real quick
because I don't want to here I want to
start from scratch with you guys all
right so under the backup pane you're
going to see a system backup as we did
before I believe I demonstrated this
before but not with a Nas So today we're
going to do it with nas we're going to
focus mainly on how to add a share or
Nas device so for name let's
just name it real quick and then for
some options so you got backup mode you
can choose intelligent sector backup
which is recommended or make an exact
backup the difference between these is
basically an exact backup it's going to
specify however much free space you have
on your disc where as intelligent sector
backup is basically only going to
include how much space you have used up
on your disk in your backup
image and you got backup service over
here I'm not going to change anything
you can also give commands pre-command
and post command both being text
commands you can select the compression
level whether you want to split the
image the operation priority and whether
you want to automatically create a
folder with the same name as a task in
my case OS
backup you can also choose to save those
settings the configuration you've just
done to your Global so that every time
you go to create a backup it will show
up exactly as you configured right
here and now since I didn't configure
anything I'm going to click
cancel and let's schedule the backup I
want my backup to run monthly at let's
say
APM on the first Monday of each month
sure let's
go and here we have our main thing we
want to add a share or Nas
device so for my Nas device since I've
already connected it in my file explorer
we're going to take a look here it's OS
backup that's the folder name and the
folder name is in the subdirect
directory of the nas folder right
so we're going to basically for the
server name enter
Nas here because I've configured my
server name to be Nas and I've already
connected it in file explorer I don't
have to manually enter the IP address
again but if you haven't configured it
feel free to enter the IP address and
then enter a slash for your share name
so share name here is going to be OS
backup here we go and after entering
that we want to click the little button
over
here and it's going to find my server if
it found the server and if the server
has authentication it will ask us for
our username and our
password okay
and then after we click okay it's going
to show basically the contents of the
share and we're going to back up in the
root directory and override this folder
so yeah we're just going to select the
root
directory okay and now after we select
our backup scheme for me it's going to
be incremental backup and I want after
every two incremental backups perform
one full backup I also want to enable
automatic cleanup clean up by
quantity five sets of
backups and create one full backup
always before doing another
incremental all right and after that we
are going to start our
backup add the schedule and start backup
now or only add the schedule in my case
I'm going to show the backup process so
add a schedule and start backup
now okay now that the backup is finished
let's close this up and go to file
explorer to verify that it's actually
finished we can see the folder size 484
GB and the name is indeed my task name
which is OS
backup here you see the backup
image so here we have the size and here
we have the DAT
modified all right and that effectively
concludes today's video thank you guys
for watching and be sure to drop like
And subscribe if you found this content
helpful see you guys in the next video
goodbye for now

Video Length: 06:06
Uploaded By: Footprint Technologies
Published: 1/13/2024
View Count: 2,130

Related Software Products
AOMEI Backupper Server
AOMEI Backupper Server

Published By:
ChengDu AoMei Tech Co., Ltd.

Description:
AOMEI Backupper Server: Image Backup, Bare-Metal Restore and Cloning for One Windows Server AOMEI Backupper Server is a backup and disaster-recovery program for a single Windows Server machine (2025 back to 2012 and SBS 2011), at $299 once with lifetime upgrades or $149 a year. It suits a small business with one file or application server that needs scheduled system images, bare-metal restore and disk cloning, without the cost of an enterprise...


Related Videos
How to create and restore OS from backup image file using AOMEI Backupper
How to create and restore OS from backup image file using AOMEI Backupper

Video Length: 10:39
Uploaded By: Footprint Technologies (7/19/2022)
View Count: 29,008

How to Download free AOMEI Backupper for Windows PCs and Servers
How to Download free AOMEI Backupper for Windows PCs and Servers

Video Length: 02:06
Uploaded By: AOMEI (10/12/2019)
View Count: 7,025

Copyright © 2026, Ivertech. All rights reserved.