You have a scanned part as a mesh, and Rhino can't do much with it. You can't trim it, offset it or send it to CAM the way you can with real surfaces. RhinoResurf is a Rhino plug-in built to fix that. It rebuilds NURBS surfaces from a mesh or a point cloud.
Quick facts
- Edition covered: RhinoResurf for Rhino 4 and 5 (32-bit)
- Platform: Windows, as a plug-in for Rhinoceros 4.0 and 5.0
- Vendor: RESURF
- Trial: the vendor offers a trial version of the plug-in for download
- Newer releases: the vendor's current versions for Rhino 5 (64-bit) through Rhino 8 are sold as a yearly subscription
Key features
Drape a surface over a point cloud
The RsPoints2Surf command lays a surface over a point cloud within a tolerance you set. It works like laying cloth over an object, and the drape direction is calculated automatically.
Turn an open mesh into one NURBS surface
RsMesh2Surf converts an open mesh to a single surface at a specified tolerance. The mesh may have interior holes. You can also draw closed lines on the mesh to select just a sub-mesh and convert only that part.
Split an open or closed mesh into multiple surfaces
With RsMesh2Surfs you draw a curve network on the mesh and the plug-in builds multiple NURBS patches. The transitions between neighbouring patches reach G1 continuity.
Merge meshes before you convert
RsMergeMeshs joins several meshes into one mesh body, so scans taken in pieces can be handled as one.
Commands inside Rhino's own menus
You load the plug-in manually the first time. After that it loads itself and adds its commands plus a Resurf submenu to Rhino.
Who it's for
This suits Rhino users who start from scan data or meshes and need editable surfaces. The vendor lists reverse engineering, metal forming design and 3D modeling for entertainment as its target areas.
Pros and cons
- Pro: you control the fitting tolerance.
- Pro: it handles both a single-surface workflow and a multi-patch workflow.
- Pro: it adds commands to Rhino's own menus instead of making you learn a separate program.
- Con: this edition is for Rhino 4 and 5, and it is the older line. The vendor's newer versions target Rhino 5 (64-bit) and later.
- Con: it only works inside Rhino, so you need a Rhino license.
FAQs
What can it convert?
Meshes and point clouds. Point clouds can also be turned into a mesh first, using the plug-in's own command.
Does it work on open and closed meshes?
Yes. Open meshes can become one surface. Open or closed meshes can become multiple surfaces.
Can I try it first?
The vendor offers trial downloads of its plug-ins.
Which Rhino versions does this edition run on?
Rhinoceros 4.0 and 5.0, in the 32-bit builds.
System requirements
Windows with a compatible copy of Rhinoceros 4 or 5 installed. The listed operating systems are Windows NT/2000, Windows XP, Windows Vista and Windows 7.