How to get the Laser Diode Out Of A DVD Burner

200mW red laser!!
self explanatory realy i show you how to get the laser diode out of a phillips 16x dvd burner
Considering holding a competition for some random music if you have anythoughts
YOU CANNOT USE A CD CDRW or DVD ROM THEY WILL NOT WORK!

Facebook: http://www.facebook.com/tingawinga5
Folding@home team: 123464
Twitter: www.twitter.com/tingawinga
Website: www.tingawinga.co.uk
TingaWinga SubReddit: http://www.reddit.com/r/TingaWinga/Go... https://plus.google.com/+Tingawinga5/...

---

Closed Caption:

softly first you need to take a DVD
burner to get it open cuz four screws on
the button and do them for in title and
pretty easy to get off and once you've
got them off your the fun bit of taking
the casing up just jamming screwdriver
and as you can see that it could run to
the drive back over what we've got here
is a safety pin will say the second i'm
going to use this type of the drives
quick-release need to get this part open
so you can get inside the drive we gotta
try coming apart so that it comes out to
get you want to put even from the bump
now this and this and that comes off so
when the front of dr want to come out to
one got on the end of course you gotta
get that they're our first skipped this
case and all the clips or you can
wrestle with it pull it from the back
we have it like it's out now here's a
laser assembly we can see it definitely
about student show me the camera so it
was four screws hair there are little
green grommets which we'll see in a
minute want to undo all four so here's
the grommet little green squeegee thing
but once you've got this force grout
screws out the whole assembly 26 out
what you got all the ribbon cables and
quite tightly held in so it quite
difficult clipped all over the place you
could just cut them that have urged hold
until they come out to take some pulling
to get out of the walling clips here we
go there
I don't need that plastic right down to
this little bit just the motor assembly
know right
the mode there later assembly rising
trials your four screws to undo a minute
where this radar beacon is there
therefore screws we want ones holding
the assembly and now switching to the
camera
see more details on how to get the
assembly up and this metal back here and
this out then the other side to this
group anyone's going on this side of
mother then you ended milk and like
magic it comes out your greasy so have a
good place to stop their laser assembly
about the ribbon cable and start doing
some more screws a lot of screws in
David
yeah move around a lot because bitches
ball off white part here where the rails
we're going to have to get that off the
diet and David a boner is not what you
think it is not that bad on the front
that you can see in but laptop vote
another different suddenly this
piecemeal here are jamming screwdriver
at least they're bent into the camera .
pop and bend it back now in there is all
sorts of lenses and refractive
refractive blocks and this two diodes
which I'll show you in a minute
make sure you have a good look identify
where everything is don't miss anything
there we go
nodes of lending blocks in there and big
giveaway here is those two circular
things with three contacts between them
die 023 contacts you wanted a solid all
the connections quite hard to do the use
a lot of solder i used a soldering iron
and solder sucker makes it pretty easy
it's not really that we want to do is
cut the ribbon cables attached to and
then cut the aluminium just go straight
into it comes up while nice process any
game are very tiny put it down here so
you keep it on it now so you get the
other one out one of the easiest David
and one these CD never tell which the
best take both the mountain test them
one will come out read one comment
infrared this is why you can't you see
the burner because it sounds like
infrared and that's powerful either
cut the ribbon cable
strong with the cabin
nobody two diodes out one infrared was
red tape that used to buy batteries so
it's only hard as all die choose this
positive at the top- the side and the
bottom was not use well we don't have
attached to drive the board which came
with Max's housing to positive and
negatives and then i made this laser
click here to the video i made it thanks
for watching don't forget subscribe and
drive home team and became follow me on
twitter if you want and email me if you
have more questions
subscribe