How to Remote Desktop Access Windows 10

This tutorial will show you how to fully configre and access RDP in Windows 10.

Video Tutorial:
http://www.avoiderrors.net/?p=25426

---

Closed Caption:

hi my name is made of marble error start
net in this tutorial I'm going to be
showing you guys how to remote access a
Windows 10 PC to remote access IPC you
will need to create a user with a
password or add a password to a current
user not to do that
head over to control panel under review
by select small icons user account
manage another account and here you can
add a new user or just select the
current user and a password to that user
create a password and enter a new
password once you
with this we will need to get the IP
address of this pc done now on your
keyboard press the windows key + r you
open the run window and then type CMD to
open the command prompt and click OK
here type IP config press Enter
it will provide you with the IP address
and default gateway IP write it down
because we're going to use it in the
future
once we're done close the command prompt
now right-click this pc properties
here click on remote settings from the
left and check mark on the remote
desktop allowing more connection to this
computer and uncheck allow connections
only from computer running remote
desktop with network level at that
authentication to this would just
complicate things
now if you want to add a user just click
on select users click Add
so you want to add someone other than
the administrator you can add it here
but by default the administrator is
enabled for remote desktop so I'm going
to cancel here
cancel
and apply the settings this pc is fully
set up for remote desktop connection
now what we need to do is remote access
to that pc from a computer in the
network or land that way if we try
connecting from the one or outside the
network if it gives us any problems we
can isolate it to the routers firewall
or router of the accessing the windows
10 remote pc from another windows 10
within the land
all i need to do is click on start
remote and then click on remote desktop
from the result and here type the local
IP address which is 1000 at ten and
connect and to the remote user name and
password remember my credentials
ok now here click on yes
done
we have successfully remote desktop a
Windows 10 PC within the network or land
now we need to try to remote desktop the
same pc from the one or outside the
network for this we will need to
configure the router or router firewall
to enable port 3389 now from that same
pc that you're going to remote access
the Windows 10 PC open Microsoft edge
and here type
what is my IP address and it will
provide you with your when IP address or
you can go to IP location that net force
/ find ip address just like you see it
here i'll put the link in the
description box it will provide you with
the one IP address write it down because
we're going to use it in the future
once done in microsoft edge enter in the
search
HTTP colon forward slash forward slash
and the gateway IP address to login to
your router in this case I don't have a
router
I have the ISB modem it also requires a
username and password once there
locate port forwarding it should be
somewhere in the firewall in your case
here make sure that port forwarding is
enabled and add a service name of the
service i'll name it
rdp remote desktop the server IP address
is 1000 at ten servicetype tcp and UDP
and this starting port and import is
3389 once you're done click on add
perfect now my router is configured to
enable remote desktop through the
firewall
now instead of using the local IP
address
try using the one IP address
what's that once you're done click on
connect
and to the remote user name and password
remember my credentials and click ok and
you should be able to remote access that
pc from outside the network or land done
here this have successfully mode that pc
from the one
thank you for watching this video my
name is Miguel if you have any questions
feel free to post them in the comments
section below
thank you