12V Delay Timer Relay 0 - 10 seconds

http://www.oznium.com/12v-delay-timer...

---

Closed Caption:

the 12 volt do a timer really and this
one is zero to ten seconds and on this
side we have the input it is the ground
and then the voltage so the the positive
and negative the ground is obviously a
negative the BCC is the positive and
then on the side it's the relay output
and so have hooked up here to the total
power supply and i'll go ahead and turn
the power supply call me back on you see
what happens
Paris plays off and all sent color to it
now you notice this blue LED lights up
and then we wait a while and then this
one lights up
so what's happening is on this side
there's a calm sea que and CB
so right now both of the leds are
grounded to the ground and then we run a
wire from the positive over here to the
calm and then when when the relay is in
the normally closed position then it
will send power from calm to the CB is
lighting up ability here and then after
about 10 seconds or so or however much
you adjusted with this little dial then
it will line up the white led by
connecting the common ck
so good as soon as you apply power on
the side then the calm and the CB will
be connected never power is applied and
after the timer activates then the calm
and the ck will be connected these two
so they normally closed position these
two are connected and then when when
they really activates in these two are
connected