Serial over Ethernet

http://www.serial-server.net/

---

Closed Caption:

serial to Ethernet Connector is an
advanced software solution for sharing
serial port devices over tcp/ip network
as the result any serial port device
connected to comport can be accessed
from anywhere in the world as if it is
attached to your local PC with serial to
Ethernet Connector you gain ability to
turn your PC into a home server with
multiple clients with or without SEC
installed this connection type is
convenient when you need to pass the
data from or to your serial device
operate with serial port device
connected two real serial port on your
local PC using some application which is
installed on the target PC connect to
applications installed on different PCs
via LAN or Internet with the help of
virtual serial ports connect to the
remote device which supports telnet RFC
2217 protocol and communicate with it as
if it were connected locally work with
serial port device on a virtual machine
in case application which is supposed to
communicate with the serial device does
not support of the server PC to install
serial to Ethernet Connector go to
Eltima dot com and enter products page
here you'll be able to choose your OS
notice serial to Ethernet Connector is
available in Windows Linux and win
mobile versions and download the demo
then click the executable file and
follow the on-screen installation
instructions now launch the application
before you start you can get acquainted
with useful tips in welcome screen of
the application once launched serial to
Ethernet Connector and see how to create
serial port connection over network
choose the connection type in the main
screen of serial to Ethernet Connector
it is create server connection in this
case now several settings should be
configured apply connection name created
virtual Port Said strict baud rate
emulation specifies the local TCP port
number which the server will listen to
now you can customize advanced settings
for this connection general connection
settings network protocol settings
choose the data transmission protocol to
be used in your connection signal lines
customized comport signal line behavior
depending on the state of connection
security settings authorization and
traffic encryption customization finally
click Create Connection button in main
window once the connection has
successfully created you can see your
connection in connection street to the
left and see the summary about it now
let's create client connection at the
remote and to create a new client
connection choose Create client
connection now several setting should be
configured connection name local serial
port baud rate emulation IP list except
then you can customize advanced settings
for this connection finally click Create
Connection button once connection was
created successfully
you will see your connection in
connections tree to the left now you'll
be able to see serial port connection
created and the data sent from one
serial port to another to delete one of
the connections simply selected and
click Delete
if it's necessary for your work you can
temporarily disable created connections
without deleting them just click turn
off a sec temporarily in the main menu