USB DVR 4 Channel Motion Activated Grabber System

http://thespygeeks.com/product-demos-...

USB DVR 4 Channel System-Video Demonstration

This short video will show you how to connect and install the 4 channel USB DVR software download.

The USB DVR drivers will be downloaded within the software disc creating a smooth video transition to your PC.

One of the least expensive ways to have video security is to have a system that connects directly to your computer. I suggest that you start out with one camera and a system such as this.

With a USB DVR 4 channel system you can have from 1 to 4 cameras.

This video will provide insight on how to set up a system and use the software provided.

The drivers for the system will be in the download disc along with a dashboard to set up the cameras to your personal liking.

Learning how to set up the USB DVR 4 channel system Is easily accomplished with the instructions and the set up disc.

Logged into your system you will be able to make various adjustments to your settings.

To ensure proper set up of the 4 channel USB DVR download disc and the drivers, make sure that you are using Window 7 or XP or older.

Do you want more information on connecting a USB DVR 4 Chanel System to the internet?

Visit My YouTube Channel Below.
http://www.youtube.com/user/davidofno...

---

Closed Caption:

today we have a USB DVR what that is the
device it seems a video signal from one
of your camera and plugs into the USB
port of your computer
most computers don't have an RCA input
which is what you need in order to
convert the signal from your camera to
your computer and that's what this
device allows you to do including
software that comes with it turns your
computer into motion activated reporter
trying to record the video directly to
the computer and access it over the
internet basically how you set something
like this up you have your camera here
table 1 into the cable into here the
other end plugs into the into the video
grab yourself then you have the other
end that plugs into your computer so now
you'll be able to see everything that's
on that camera right on your computer
you alive over there
are we have
you're on your computer we're going to
double-click the super DVR icon to open
the program itself
that's going to bring up the LA split
screen with four cameras here we don't
have any cameras plugged in right now so
there's going to be a blue screen here
with the work video loss in when we
start blogging and cameras and we're
going to start seeing the camera view
here basically to get to the setup many
what we're going to do is click over
here to the right there's a lot of
padlock symbol or click that to login
username is going to be system that's
already taken for you were going to
leave the password blank it ok that
opens up these icons down here what
we're going to do is going to click on
the Settings icon or configuration icon
and from this menu here we can select
the disk that we're going to store the
recording to either the crb drug your
computer may be different you may have
other drawers here listed try not to use
the c drive as possible because that's
the computers main drive in the start
interfering with the operation of the
operating system itself over here to the
right we have the settings here for
configuring it for internet access now
you'll want to consult with your router
and your internet service provider for
the settings that you'll need to input
here but basically this is the area
where you go ahead and do that down here
on the bottom there's a checkbox here
this is motion detection and that's the
checkbox we want to have selected to
make sure that we're getting
motion-activated recording on each each
one of these four cameras here these
other settings here are four different
types of different types of recording we
have one here this is manuel record what
that will allow you to do is to schedule
a time to record this the the video from
during the day we also have the schedule
cord which allows you to do the same
thing and then we have a camera security
check box
well that what that will do is allow you
to hide the picture of the of the video
so no one can actually see it when i
logged into the program if we were to
have cameras plug in here you wouldn't
see the video loss symbol you would just
see a blue screen and it would say I
believe it says security
that's the basic renter of the of the
setting circuit of the USB DVR the only
other icons you want to worry about are
going to be this the view and playback
button which I just looked it that takes
you to the playback menu here and this
is a menu that you'll be using in order
to play back the video down here on the
bottom you have one through twenty-four
and those are the respond to the time
the hours of the day and over here is
the color coding that will correspond to
the type of recording that was