Electrolux hotte design box installation murale

Installer sa hotte Electrolux, c'est très simple.

---

Closed Caption:

yeah
bring the herd into the installation
area unpack the hood by guiding a knife
along the center of the packaging taking
care not to damage the product inside
you will find the manual and fitting
components take a moment to read through
the manual to make sure you fully
understand the installation process for
the next step you will need to chimney
brackets the hanger bracket and a level
put the two chimney brackets and hanger
bracket in place and love the screw
points
yeah
fully fix the three brackets into place
using the screws provided
yeah
ensure all the brackets are level
remove the hood from the box hang the
hurt in position on the hanger bracket
using two of the screws provided fix the
hood onto the bracket
now you'll need the electricity box
place the electricity box into position
on top of the hood using the two screws
provided fix the electronic box into
place
once in position on top of the hood
connect the interface motor light and
the main power cable
you will now need the two chimney parts
remove the protective foil from the two
chimney parts you would now plug them in
using a pre-prepared socket place the
top part of the chimney in the place by
clipping it onto the top bracket fix the
top part into place using the two screws
provided place the larger bottom section
off the chimney into place and connect
it to the top to me part fix into place
using two of the screws provided for the
next step you will need the filter cover
click the filter cover into position
under the hood
clean the product your installation is
now complete and ready for your customer